Adams Rite 4730 - Standard Duty Deadlatch

Application

The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours.

A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times

Specification

  • 4530 Deadlatches are designed to fit without alteration, the stile cutout for older MS1850 Deadlocks and discontinued 4250 Deadlatches of same backset.
  • While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
  • All metal. Deadlocks latchbolt to prevent "loiding" or case-knife entry.
  • Standard strike furnished is 4901-01 for flat jamb. For dimensions of this as well as radiused and/or short strikes
  • 4530 Standard Duty Deadlatches are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown.
  • Cylinders with MS® cams can be readily obtained from most cylinder manufacturers.
  • Case measures 1" x 5-13/16" x depth. Depth varies by backset. Steel with corrosion-resistant plating
  • Latchbolt: 1/2" x 1" x 1/2" throw. All metal with hardened steel internal pins. Handing is reversible without special tools.
  • Faceplate measures 1-1/4" x 7-13/32"

 

Finish

Standards

Ordering Options
4730-100-5
4730 D.LATCH 7/8 B.SET BODY ONLY LH 188MM FRONT PLATE
4730-200-5
4730 D.LATCH 31/32 B.SET BODY ONLY LH 188MM FRONT PLATE
4730-300-5
4730 D.LATCH 1 1/8 B.SET BODY ONLY LH 188MM FRONT PLATE
24-4730-002-628
4730 F.PLATE, SAA