9D017B - Steel Fire Door 60 min Integrity


A Chubb Locks Custodial Services Ltd steel fire door with 60 mins fire resistance integrity for use in police custody. The door incorporates a laminated glass vision panel, a Type 2 Chubb 3G112 heavy duty mortice deadlock & continuous hinge.


Specifications, Performance Data & Tolerances

  • Fire Resistance 60 mins Integrity to BS EN 1634-1:2000
  • Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

Door Frame

  • 125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004
  • 25x25x3mm Rolled Hollow Section Steel Rebates to BS EN 10025:2004
  • 75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Frame Fixings Hilti HSL-TZ M8/20 Sleeve Anchors 10no. minimum per frame

Door Leaf

  • 3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009
  • 40x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004
  • Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001
  • Ligature Resisting Continuous Hinge Capable of Supporting Weight of Door Leaf
  • Fire Rated Security Laminated Glazing
  • Intumescent Glazing Gasket
  • Glazing Frame Fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2
  • Type 2 Chubb 3G112 Heavy Duty Mortice Deadlock Operable Both Sides
  • Recessed Pull Handle Both Sides Stainless Steel Grade 304

Standard Dimensions

  • Structural Opening 910mm Wide x 2100mm High
  • Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)
  • Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 46mm Thick
  • Frame Clearance 7mm Jambs, 7mm Head
  • Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut


  • Powder Coat Epoxy Primer to BS EN 12206-1:2004