HS280 - Specialized Function Lock


 The HS280 lock incorporates several functions within the one lock case. The lock can be operated from inside with either a push bar, paddle handle or lever handle with key override from outside. There
is also a facility to lock the bolts when retracted or deadlock the bolts in their thrown position. The override function is disabled when the double deadlock is engaged. It is not possible for the solenoid unlocking device to override the double deadlocking or hold-back features if they are engaged.

This product does not conform to the mandatory standards BS EN 179 and 1125. You should consult your local fire officer before installing this type of locking device.



  • Available as a single, 2, 3, 4, 5 point locking
  • 25mm bolt engagement, bolts automatically thrown when door closes
  • Anti-thrust device to prevent any of the bolts from being forced back allowing unauthorised access
  • Key controlled bolt holdback and deadlock facility
  • External key entry facility
  • High security cylinder guard
  • Stainless steel forend and bolt guide plates
  • Suitable for timber and steel doors
  • Low current consumption (access control version only


  • Bolt Position Monitoring
  • Lock Position Monitoring
  • Key Position Monitoring
  • Access Control Function: 12v DC, 24v DC
  • Choice of lever handle, paddle handle or push bar internal operator
  • Tall door kits available
  • Service and Support on Installation and Maintenance



  • CE Marked
  • British Government Tested
  • Fire tested to BS EN 1634-1
  • Independently cycle tested to in excess of 1,000,000 cycles