9F008A - Interview Room Chair


A Chubb Locks Custodial Services Ltd robust anti-vandal chair designed to be bolted down to the floor intended primarily for use in police interview rooms but can be used in other areas where secure anti-vandal seating is required.


Steel Frame

  • 40x40x3mm Hot Formed Rolled Hollow Section Steel Frame to BS EN 10025:2004
  • 6mm thick Steel Flat Floor Fixing Feet to BS EN 10025:2004
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Fully Welded and Ground Smooth Joints
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Fixings Hilti HSL-TZ CSK M8/20 CSK Sleeve Anchors 4no. minimum per Chair

Chair Seat & Backrest

  • 125x45mm Ash Battens Clamped Together and PVA Bonded with Continuous Ash Tongues
  • 25x12mm Continuous Hardwood Tongues
  • European Ash Hardwood Kiln Dried Moisture Content 10 -14% Density 710kg/m3
  • Counterbored & Pelleted M10x40 Setscrew Fixings at Every Batten/Steelwork Interface
  • 13mm Radius To All Exposed Edges
  • Belt Sanded 240 Grit Finish

Standard Dimensions

  • Seat 450mm Wide x 375mm Long x 475mm High, Backrest 450mm Wide x 250mm High, 900mm Overall Height



  • Steel Frame Powder Coat Matt 30% Gloss Black to BS EN 12206-1:2004
  • Hardwood Lacquer Two Pack Semi-Matt 20% Sheen