4L78 - Electro-Mechanical Cell Lock



To provide secure locking of swinging cell doors using third party security management systems (SMS) or conventional key control, whilst providing a means for remote occupant release and bolt withdrawal via an internal handle.


The 4L78 is a surface mounted lock of robust construction based on the Chubb Lock Custodial Services standard cell lock footprint. The main bolt is a sprung latch providing a throw of 25mm, secure locking is achieved by two independent methods:

  • Electrical Mode - Locking/unlocking by 24 Volt DC controlled sequence from an external source (SMS). Bolt withdrawal by handle (externally by staff or internally by occupant), which should also be used when closing the door.
  • Manual Mode - Locking/unlocking achieved using conventional (mechanical key). Bolt withdrawal by handle, which should also be used when closing the door. Key operates from corridor side only.
  • Manual Override - In the event of power or communication failure an override key is used to disable electric locking function. The lock will operate if slammed to shut, however, CLCS recommend that in normal operation the handle is used to withdraw the bolt when closing.



  • Solid Case Technology; Lock case machined from single piece carbon steel.
  • Steel main bolt, with carbide anti-cutting rollers, and 25mm throw.
  • Dual solenoid electric locking latch.
  • Independent 7-lever locking mechanism.
  • Factory restricted key section.
  • Lock provides status monitoring outputs for critical functions and tamper.
  • 5 bolt secure fixing.
  • Integral baffle arrangements to resist manipulation and interference via the keyhole.


  • Mechanical locking mechanism tested to a minimum of 100,000 operations.
  • Handle mechanism tested to a minimum of 300,000 bolt operations
  • Solenoid locking unit tested to a minimum of 1,000,000 cycles.
  • Solenoid arrangement designed to operate at +/-10% of 24V DC regulated supply.
  • Nominal operating current 500mA.
  • Saw attack 12 hours
  • End load 13.5 kN
  • Side Load 25 kN

Additional Features

  • Can be configured to provide cell side furniture to be used where remote release is desirable.
  • Range of fixings including backplates, stud fixings, locking plate and keeps.
  • External handle designed to shear under excessive load to prevent damage to internal lock mechanism.
  • Interchangeable mechanical inner locking unit to enable re-coding.
  • This lock is not available under a master key system.

Total Range

  • The lock is available in left or right hand variants for opening in or opening out doors and can be fitted to steel or wooden doors. A range of spindle and backplate stud lengths is available to suit door thicknesses from 25 to 70mm.
  • Detailed technical details are available on request for this product.

Dimensions & Weights

Case Height286mm
Case Length267mm
Case Thickness30mm
Bolt Throw25mm
Bolt Depth45mm
Bolt Thickness22mm
Weight (lock only)12kg



  • Lock case - carbon steel electro-plated and powder coated exterior.
  • Main bolt - carbon steel electro-plated.
  • Main bolt follower high tensile brass.
  • Keys - Hardened Steel
  • Levers and springs - Brass / phosphor Bronze.