HS170 - Lock for use with Access Control Systems


The HS170 lock has been incorporated into the range to provide a lock for use with specialised access control requirements and is available in a number of configurations to meet most applications. 
As standard the lock has an automatic deadlocking function with automatic bolt throw. The solenoid actuator is available with 12 or 24 volt DC operation and can be energised to lock (fail-safe if power supply is cut) or powered to unlock (fail-secure).



  • Available as a single, 2, 3, 4, 5 point locking
  • Automatic deadlocking function
  • 25mm bolt engagement, bolts automatically thrown when door closes
  • Anti-thrust device to prevent any of the bolts from being forced back allowing unauthorised access
  • Access control locking
  • Suitable for timber and steel doors
  • Low current consumption (access control version only)
  • Aesthetic Rod Covers


  • Bolt Position Monitoring
  • Lock Position Monitoring
  • Key Position Monitoring
  • 12 or 24v DC solenoid operation
  • Available in fail-safe or fail-secure modes
  • Tall door kits available
  • External key entry overrides automatic deadlocking/access control
  • Mechanical deadlock or access control override via internal thumbturn with or without breakdome or internal key cylinder
  • High security cylinder guards
  • Key controlled overlock to disable the access control
  • Service and Support on Installation and Maintenance




  • CE Marked
  • British Government Tested
  • Fire tested to BS EN 1634-1
  • Independently cycle tested to in excess of 1,000,000 cycles