9D004 - Police Holding Room Door


A Chubb Locks Custodial Services Ltd Home Office specification door for police holding rooms incorporating a 150mm square laminated glass vision panel with privacy cover, recessed pull handle and Type 2 Chubb 3G112 heavy duty mortice deadlock. Conforms to the Police Buildings Custody Design Guide and National Police Estates Group Best Practice Document.


Specifications, Performance Data & Tolerances

  • Conforms to the Police Buildings Custody Design Guide
  • Conforms to the National Police Estates Group Best Practice Document
  • Gap between Door Leaf and Rebate Maximum 2mm Complies with Home Office Static Load Test
  • Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg
  • Home Office Approved Glass Home Type 1 specification Laminated Toughened Glass/Polycarbonate

Door Frame

  • 125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004
  • 25x25x3mm Rolled Hollow Section Steel Rebates to BS EN 10025:2004
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • 75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame

Door Leaf

  • 1.6mm thick Cold Rolled Steel Door Skins Both Sides & All Edges Hot Dip Zinc Coated to BS EN 10346:2009
  • 44mm thick Solid Timber Door Core Mixed Tropical 3 Layer Lamels Hardwood Rails & Stiles
  • Door Core Density 460 - 500kg/m3
  • Heat Pressure Bonded 80C @ 500lbs/in2 for 7mins
  • Adhesive Apollo A9267 PU
  • Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf
  • 150mm Square Laminated Glass & Polycarbonate Vision Panel with Hinged Steel Privacy Cover
  • Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable Corridor Side Only
  • Recessed Pull Handle Corridor Side Cast Stainless Steel Grade 304

Standard Dimensions

  • Structural Opening 910mm Wide x 2100mm High
  • Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)
  • Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 46mm Thick
  • Frame Clearance 7mm Jambs, 7mm Head
  • Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut


  • Powder Coat Epoxy Primer to BS EN 12206-1:2004