9D015A - Police Pass/Exercise Yard Door

Application

A Chubb Locks Custodial Services Ltd door typically used for police station pass or exercise yard doors within custody. Incorporating a 150mm square laminated glass vision panel, recessed pull handle and Type 2 Chubb 3G112 heavy duty mortice deadlock. Generally conforms to the Police Buildings Custody Design Guide and National Police Estates Group Best Practice Document.

Specification

Specifications, Performance Data & Tolerances

• Generally Conforms to the Police Buildings Custody Design Guide
• Conforms to the National Police Estates Group Best Practice Document
• Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

Door Frame

• 3mm thick Pressed Steel Profile Frame125x69x50mm 19mm Rebate Electro-Zinc Coated to BS EN 10152:2009
• 75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor
• Steel Fabrication to BS EN ISO 9001: 2000
• Welding to BS EN 1011-2: 2001
• Frame Fixings Hilti HSL-TZ M8/20 Sleeve Anchors 10no. minimum per frame
• Security Type Frame Grommets to Conceal Fixings

Door Leaf

• 1.6mm thick Cold Rolled Steel Door Skins Both Sides & All Edges Hot Dip Zinc Coated to BS EN 10346:2009
• 44mm thick Solid Timber Door Core Mixed Tropical 3 Layer Lamels Hardwood Rails & Stiles
• Door Core Density 460 - 500kg/m3
• Heat Pressure Bonded 80C @ 500lbs/in2 for 7mins
• Adhesive Apollo A9267 PU
• Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf
• 150mm Square Laminated Glass Vision Panel
• Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable One or Both Sides
• Recessed Pull Handle Both Sides Cast Stainless Steel Grade 304

Standard Dimensions

• Structural Opening 910mm Wide x 2100mm High
• Overall Door Frame 900mm Wide x 2093mm High (Height From Finished Floor Level as Threshold Cast into Floor)
• Door Leaf 782mm Wide x 2030mm High Excluding Hinge(s) x 48mm Thick
• Frame Clearance 5mm Jambs, 7mm Head
• Door Leaf Clearance 3mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

Finish

• Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards