3K70 - Upright 2 bolt mortice lock Application PurposeTo provide a means of securing wooden doors on offices and rooms where the use of a handle is required.OverviewMortice lock with formed-up case and welded Forend. Flat cap screwed to pillars in case. Upright construction with follower for handle in line with and above the keyhole.Deadbolt operable by key only from either side (full turn to lock or unlock). Latch released by knob/handle only from either side, but will re-engage without the use of the knob/handle, under light door closing force.Product CodesH3K70/211/S 2/B MORT LH SAT O/SUIT NO KEYSH3K70/211A/S2/B MORT LH SAT N/SUIT NO KEYSH3K70/212/S 2/B MORT RH SAT O/SUIT NO KEYSH3K70/212A/S2/B MORT RH SAT N/SUIT NO KEYSStandard FeaturesSteel Body.Latch bolt allowing use of a handleBrass deadbolt with 14mm bolt throw.Anti-padsaw steel rollers.5 detainer mechanism with thousands of key combinations.Built in protection against picking, drilling, force and torque attack.Unique Steel key.OptionsOptional micro-switches for alarm systems integration.Can be suited as part of a master keyed system Specification Finish Materials and FinishesLock case - carbon steel electro-plated.Main bolt and latch bolt - brass.Main bolt thrower - high tensile brass.Levers and springs - Brass/phosphor bronze. Standards Performance/Testing CriteriaMechanical locking mechanism tested to a minimum of 60,000 operations.Saw attack on the main bolt 5 minutes.Side Load 13.5KNEnd Load 1.2KNHandle mechanism tested to a minimum of 300,000 bolt operations. Downloads 3K70 - Upright 2 bolt mortice lock (.pdf, 48 kB) Close 3A63 - ATLAS® Electronic Pass LockPurpose To provide secure locking of swinging pass doors… 4L55.066 - Handle Replacement KitPurpose To enable conversion of either T handle or old st… 3M51 - Upright clutch bolt mortice lockPurpose To provide a means of securing sliding wooden doo…