3R66 - Morticed Electro-Mechanical Deadlock

Application

Purpose

To provide secure locking of swinging passage / control doors using third party security management systems (SMS) or conventional key control. Designed to enable key and electric operation from both sides of the door. This lock is specifically designed for very high use applications; typically securing perimeter gates and main access routes.

Product Codes

3R66/001/03/S D/C PASS D'LOCK BODY ONLY
3R66/002/01/S D/CONT P/LOCK ILU W/D NO FIX ITEMS
3R66/002/02/S D/CONT P/LOCK ILU W/D + FIX ITEMS
3R66/002/03/S D/CONT P/LOCK ILU S/D NO FIX ITEMS
3R66/002/04/S D/CONT P/LOCK ILU S/D + FIX ITEMS

Overview

The 3R66 is a mortice lock of robust construction based on the Chubb Locks Custodial Services large mortice footprint. It has a substantial bolt designed to be withdrawn by means of a large 'T' handle or lever handle, on either side of the lock, whether opening or closing the door. Locking is achieved by means of a completely separate (and interchangeable) inner locking unit, operable from either side, the vertically sliding bolt of which, engages in a recess in the main bolt: additionally, a plunger controlled by the solenoid unit, operates in a similar manner via an electronic management system.

Principal of Operation

Electrical Mode

Locking/unlocking by 24 Volt DC controlled sequence from an external source (SMS). Bolt withdrawal by handle, which should also be used when engaging the bolt to secure the door.

Manual Mode

Locking/unlocking achieved using conventional (mechanical key). Bolt withdrawal by handle, which should also be used when engaging the bolt to secure the door.

Manual Override

In the event of power or communication failure an override key is used to disable the electric locking function.

Standard Features

  • Solid Case Technology; Lock case machined from single piece carbon steel block.
  • 25mm throw solid steel main bolt fitted with anti-saw Tungsten Carbide rollers
  • Unique dual solenoid electric locking latch.
  • Independent 8-lever locking mechanism.
  • Lock provides status monitoring of critical functions and tamper.
  • Integral baffle arrangements to resist manipulation and interference via the keyhole.
  • Dedicated key profile operates 3A63/3R63/3R66 group of locks only.

Additional Items

  • Gatebox
  • Lock interface unit for operation with commercial access control systems
  • Door cable
  • Reinforcing plates for use on timber doors

 

Specification

Finish

Materials and Finishes

Lock case - carbon steel electro-plated.
Main bolt - carbon steel electro-plated.
Main bolt follower - high tensile brass.
Keys - hardened steel
Levers and springs - brass / phosphor bronze.

Options

Various furniture options are available upon request

 

Standards