Power Supplies - DC & AC Power Supply Units

Blue_3G.jpg CE.png

Application

The Adams Rite Rite Power Supply Unit is a mains powered battery supported standby power supply, housed in a robust, compact wall mounted steel fabricated case (except 4605) with a lift-off hinged front panel.

Specification

  • Case is epoxy powder coated, with cable entry provided by 20mm conduit knock-outs located in top and bottom and each side of the case.
  • Standby power is automatically provided from a battery or batteries connected to the battery charging output.
  • Battery charging output is provided to continuously charge up to either 1 x 12v 7 Amp Hour or 2 x 12v 3 Amp Hour (connected in series) sealed acid batteries.
  • DC version avaliable in 12v 1 or 3 Amp
  • 12/24V selectable - 2 or 1 Amp respectively
  • 4605 12V AC trabsformer for AC electric strikes

Finish

7100 Series Electric Strikes ~ Armlock® 261 & 281 Direct-Pull Magnets ~ MS Maglock ~ Armlock® 1354 Mini Electro-Shearmagnet ~1391 Electric Solenoid Bolt ~ Push-to-Exit Button

Standards

Material:Mild steel box, powder coated white with hinged lid (type BX 5, except 4605)
Dimensions:233mm x 233mm (12-01 & 1225) 233mm x 310mm (12-03)
Input:Mains 230V AC (50 to 60 Hz)
Output:Selectable 
Output Voltage Tolerance:+/-10%
1225 Current Output (max):12vDC - 2 Amp, 24vDC - 1 Amp
12-01 Current Output (max):12vDC - 1 Amp
12-03 Current Output (max):12vDC - 3 Amp
4605-240 Current Output (max):12vAC - 2 Amp, 24vDC - 2 Amp
Other Features:Built in aluminium heat sink
 Mains input voltage and DC output voltages are protected by 20mm fuses.
 Output ripple better than 20 millivolts pk-pk on full load
 Red LED to indicate mains volatge present; green LED to indicate DC output voltage present
 Transformer flash tested at 4kV
 Varnished to reduce mains hum.
Ordering Options
12-01
POWER SUPPLY 12V DC 1AMP 10% VOLTAGE TOL ROHS COMPLIANT
12-03
POWER SUPPLY 12V DC 3AMP 10% VOLTAGE TOL ROHS COMPLIANT
1225
POWER SUPPLY 12/24V DC 10% VOLTAGE TOL ROHS COMPLIANT
4603
RECTIFIER