Adams Rite 1354 - mini electro-shear magnet Application The Adams Rite Armlock® 1354 is a mini Electro-Shearmagnet to facilitate remote access where minimal intrusion into the environment is required.The product caters for single action internal doors or external doors where a form of cover is situated above the doorway to prevent direct rain penetration. Specification Compact slim line size - 30mmNominal 1500kg shear holding forceAdjustable locking time 1-30 secsSuitable for door gaps up to 8mmSupplied with 3m cableNon-handed Guarantee 1 yearCE Marked to EMC DirectiveMortice or surface versionsCan be fitted into the head or vertical locking stileSuitable for aluminium, timber, steel and glass doorsSuitable for use on aluminium, timber and steel doors Finish RiteKey Keypad ~ Push-to-Exit Button ~ Power Supply Unit Adams Rite Standards Magnet Dimensions (excluding shear pins):Mortice magnet: 30mm x 164mm x 25mm. Surface magnet: 38mm x 200mm x 38mm.Adjustable Armature: Mortice:30mm x 164mm x 35mm.Surface:38mm x 200mm x 38mm.Magnet Material:Electroless nickel plated steel in aluminium chassis.Finish:Surface mounted housing finishes: Standard: Brushed silver, gold or bronze anodised on request.Nominal Holding Force:1500kg (assuming correct installation/alignment).Supply Voltage:Dual, 12 or 24vDC.Nominal Current Draw:Pull in - 1.5A @ 12vDC, 1.5A @ 24vDC. Holding - 0.5A @ 12vDC, 0.4A @ 24vDC.Locking Gaps:Distance between armature face and magnet face: 12vDC: Horizontal/vertical application - 4mm max. 24vDC: Horizontal/vertical application - 5mm max.Locking Tolerance:Lateral - ± 2mm. Longitudinal - ± 5mm.Door Gap (sensor range):Maximum 8mmLocking Time:Factory set at 1-2 seconds, adjustable up to 30 secs.Monitoring:Precise anti-tamper monitoring of lock status using "hall effect" switch. Volt free changeover contacts rated @ 24vDC 1A for remote monitoringDoor Position Contacts:Built-in door position switch. Note that an independent door position switch must be fitted in steel door applications (order 1354-0600 separately).Retry Facility:Failure to lock due to slight misalignment will result in the lock automatically retrying, up to a further 10 times, if required.Handing:Non-handedCable Length:3mAmbient Temperature:Operating -20°C to +40°C. It is essential to use a fully rectified and regulated PSU with the 1354.Note:To achieve immediate release, it is important that the release switch breaks the circuit on the positive supply to the magnet. Downloads 1354 mortice fitting instructions (.pdf, 369 kB) 1354 surface mounted fitting instruction (.pdf, 161 kB) Close Ordering Options 1354-0100 MORTICE MOUNTED MINI SHEARLOCK 12-24V DC WIDTH 30MM 1354-0102 MORTICE MINI SHEAR MAGNET 12/24VDC SURFACE ARMATURE 1354-0201 SURFACE MOUNTED MINI SHEARLOCK 12-24V DC BRUSHED SILVER ANOD Close ASSA M8031X002 - shear magnetFor use where the highest level of security for people is… Adams Rite 1354 - accessories